Latest products

Redding Pilot Stop - 22Cal

Precision CNC machined stainless steel for use with the Redding Case Neck Gauge and Flash Hole Deburring Tools.Designed to properly fit new and resized case necks, these pilot stops feature a very unique shape. Slightly undercut, this shape will not pick up imperfections at the case mouth or neck/shoulder junction resulting in smooth accurate indicator readings when used with the new Case Neck Gauge..

$8.99

Redding Pilot Stop - 20Cal

Precision CNC machined stainless steel for use with the Redding Case Neck Gauge and Flash Hole Deburring Tools.Designed to properly fit new and resized case necks, these pilot stops feature a very unique shape. Slightly undercut, this shape will not pick up imperfections at the case mouth or neck/shoulder junction resulting in smooth accurate indicator readings when used with the new Case Neck Gauge..

$8.99

Redding Match Precision Case Trimmer

Redding Match Precision Case Trimmer The Redding 2400 Match Precision Case Trimmer is designed with a push button chuck lock for faster loading and unloading of cases up to 3-1/4" in length, the 2400 trimmer is made from cast iron for years of use and features pre-drilled holes to store the accessories it comes with. This trimmer is unique from others because its doesn't require the use of different sized collets to hold cases square to the cutter to get accurate and repeatable trim lengths. Technical Information: Maximum Case Length Trimmed: 3-1/4" Material: Cast Iron Collets Used: None Collets Included: N/A, Unit has a universal collet Pilots Used: Redding Pilots Included: Yes, (22 Cal, 6mm, 25 Cal, 270 Cal, 7mm, 30 Cal) Includes: Also comes with two neck cleaning brushes that will work with 22 through 30 caliber cartridges and a small and large primer pocket cleaner) Features: Micrometer adjustable to 0.001" Titanium Nitride (TiN) coated cutter ..

$379.99

Redding Master Hunter Deluxe 3-Die Set - 7PRC

Following the introduction of Bullet Seating Micrometers for Reddings standard series of seating dies, their customers have been asking for complete die sets with this added precision. The upgrades includes combining a Carbide Size Button in the full length sizing die and the Bullet Seating Micrometer on the seating die. Premium Deluxe 3-Die Set Includes: • Carbide Size Button in the Full Length Sizing Die • Bullet Seating Micrometer on the Seating Die • Standard Neck Sizing Die..

$324.99 $379.99

Redding Master Hunter Deluxe 3-Die Set - 6.5CM

Following the introduction of Bullet Seating Micrometers for Reddings standard series of seating dies, their customers have been asking for complete die sets with this added precision. The upgrades includes combining a Carbide Size Button in the full length sizing die and the Bullet Seating Micrometer on the seating die. Premium Deluxe 3-Die Set Includes: • Carbide Size Button in the Full Length Sizing Die • Bullet Seating Micrometer on the Seating Die • Standard Neck Sizing Die..

$324.99 $379.99

Redding Imperial Dry Neck Lube

Simply dip the cartridge case neck into the ceramic media. The media consists of high density ceramic spheres that are pre-charged with Imperial Dry Neck Lube. Can be used with all cartridge cases including 17 cal...

$19.49

Redding Full Length Die Set - 7PRC

Full Length Die Set for Bottleneck Cases - Full length die sets for bottleneck cases contain two dies. The full length (FL) resizing die contains a decapping rod assembly with a neck expander (size button). The seating die (ST) includes bullet guide, built-in crimp ring and the proper seating plug. Full Length 2 Die Set Includes: • Full Length Resizing Die • Seating Die ..

$94.99

Redding Competition Shellholder Set #1

Makes every die a custom die! Now you can control headspace. The new Redding Competition Shellholders are packaged in five piece sets in .002” increments (+.002”, +.004”. +.006”, +.008” and +.010”). Each shellholder has a distinct black oxide finish and is clearly marked to indicate the amount it will decrease case-to-chamber headspace. You can now easily adjust the shoulder bump to customize cases to your specific chamber. Size #1 ..

$109.99

Redding Competition Shellholder #6

The Redding Compeition Shellholder Kit #6 consists of five shellholders in varying heights with increments of .002". Allows you to increase or decrease the case to chamber headspace without adjusting the dies. Storage box included. Notes: Packaged 5 piece set in .002" increments (+.002", +.004", +.006", +.008" & +.010") Each shellholder is clearly marked to indicate the amount it will decrease case to chamber headspace. Set allows you to adjust case to chamber headspace of your reloads with a simple shellholder change. Set fits: 223 WSSM 6mm-300 WSM 25-300 WSM 25-300 Remington Ultra Magnum 257 Weatherby Magnum 257 STW 264 Winchester Magnum 6.5mm Remington Magnum 6.5mm STW 6.5mm-300 WSM 6.5mm-300 Weatherby Magnum 6.5mm-300 Remington Ultra Magnum 270 Weatherby Magnum 270 WSM 270-300 Winchester Magnum 270-300 Weatherby 270-300 Remington Ultra Magnum 284 Baer 7mm Remington Magnum 7mm Remington SAUM 7mm WSM 7mm Weatherby Magnum 7mm Hart Magnum 7mm Remington Ultra Magnum 7mm STW 7x61mm Sharpe & Hart 7x66mm Vom Hofe S.E. 7mm- 300 Weatherby Magnum 7mm-300 Winchester Magnum 7mm-300 Remington Ultra Magnum 7mm-350 Remington Magnum 30 Hart Magnum 30-338 Winchester Magnum 30-8mm Remington Magnum 30-350 Remington Magnum 300 H&H Magnum 300 Winchester Magnum 300 Weatherby Magnum 300 Mashburn Magnum 300 Jarrett 300 Remington SAUM 300 Remington Ultra Magnum 300 WSM 308 Baer 308 Norma Magnum 8mm Remington Magnum 8mm-338 Winchester Magnum 8mm-300 Winchester Magnum 8mm-300 WSM 8x56mm Mannlicher 338 Winchester Magnum 338 Baer 338 Jarrett 338-308 Norma Magnum 338-300 WSM 338-8mm Remington Magnum 338-300 Winchester Magnum 338-350 Remington Magnum 340 Weatherby Magnum 338 Remington Ultra Magnum 35-8mm Remington Magnum 35-338 Winchester Magnum 35-300 Weatherby Magnum 35-300 WSM 350 Remington Magnum 358 Norma Magnum 358 STA 9.3x74mm R 9.3mm Wilson 375 H&H Magnum 375 Mashburn Magnum 375 Weatherby Magnum 375-300 Winchester Magnum 375-300 WSM 375 Remington Ultra Magnum 375-8mm Remington Magnum 375-338 Winchester Magnum 375-350 Remington Magnum 416 Remington Magnum 416-300 Remington Ultra Magnum 416-300 WSM 416 Hoffman 416 Taylor 416 Express 425 Express 450 Ackley Magnum 450 Marlin 455 Webley 458x2" American 458 Winchester Magnum 470 Capstick ..

$109.99

Redding Competition Seating Die Standard (STD) Profile Replacement Stem - 7.62mm / .30 Caliber (Long) Cartridges

Product: Competition Seating Die Replacement Seating Stem (Standard/STD Profile)Caliber Size: 7.62mm / .30 Caliber (Long Configuration)Material: Precision-machined, hand-finished steel alloy..

$42.99

Redding Case Trimming Lathe 1400XT

Redding Case Trimming Lathe 1400XT The Redding TR-1400 Case Trimmer is a great trimmer for reloaders looking for an accurate trimmer that will meet most trimming needs. The cutter is held stationary for maximum rigidity while the case is turned. The trimmer features a sturdy cast iron frame, universal collets, adjustable cutter shaft and coarse and fine adjustments up to 0.001". The titanium nitride surface treatment on the replaceable cutter head help to ensure maximum life. Technical Information: Material: Cast Iron Base Collets Used: Yes, Universal Collet that fits all popular cartridge cases Collets Included: Yes, Universal Collet Pilots Used: Redding Pilots Included: Yes, 22 Caliber, 6mm, 25 Caliber, 270 Caliber, 7mm and 30 Caliber Includes: 6 Pilots, Universal Collet, 2 neck cleaning brushes (For 22-30 caliber cases) and 2 primer pocket cleaners (Large and Small) Features: Titanium Nitride Coated Replaceable Cutter Head ..

$214.99

Redding 6.5CM Full Length Die Set

The Redding 2-Die Set contains a full length sizing die with decapping rod assembly and seating die with bullet guide, built-in crimping ring and seating plug. The standard full length sizing die will bring cases back to SAAMI specifications for use in any standard firearm. All Redding products are produced with the highest quality materials and are thoroughly inspected to deliver the best product. Shellholder sold separately. #10 Series A 6.5CM ..

$94.99

Redding 357 Magnum 3 Die Set

Three Die Set for Straight Wall Cases - Contains three dies. This is neccessary because it is not possible to full length resize striaght wall cases and expand the neck fro proper bullet fit in one operation. The full length (FL) resizing die contains a decapping road assembly. The expander die (EXP) contains a neck expanding plug. The seating die (ST) includes bullet guide, built-in crimp ring and proper seating plug. Three Die Set Includes: • Full Length Resizing Die • Expander Die • Seating Die Shellholder sold separately ..

$94.99

Redding 300PRC Full Length Die Set

Specifications & Features Full Length Resizing Die Seating Die Shell Holder Sold Separately ..

$139.99

Redding 28 Nosler #10 Die Set

This die set contains a full length sizing die with decapping rod assembly with a neck expander and seating die with bullet guide, built-in crimping ring and seating plug. Shellholder sold separately. SPECIFICATIONS: Type : Full Length Sizer Die (with decapping / expander unit) Caliber : 28 Nosler Includes: Seater Die (with built in crimping ring and seater plug) Shellholder Not Included ..

$139.99

Redding 22 Hornet Full Length Die Set

The Redding 2-Die Set contains a full length sizing die with decapping rod assembly and seating die with bullet guide, built-in crimping ring and seating plug. The standard full length sizing die will bring cases back to SAAMI specifications for use in any standard firearm. All Redding products are produced with the highest quality materials and are thoroughly inspected to deliver the best product. Shellholder sold separately. ..

$94.99

Redding 22 Creedmoor Full Length Series B Die Set

..

$139.99

Redding .254" Titanium Nitride (TiN) Neck Sizing Bushing

This precision component is designed for use in Redding Type S Neck Sizing Dies and Competition Neck Sizing Dies. The premium titanium nitride coating significantly reduces friction against your cartridge brass, enabling ultra-smooth sizing that extends the lifespan of your cases and minimizes the need for heavy lubrication. Precision reloaders use specific bushing diameters to fine-tune neck tension down to the thousandth of an inch, maximizing ammunition consistency and accuracy. [1]..

$49.99

Real Avid Gun Boss Compact Handgun Cleaning Kit

COMPACT & READY .22 – .45 CALIBER CLEANING KIT Big functionality in a small rugged package that easily fits into a pack or range bag. A complete cleaning kit designed to keep your handgun tip-top. No annoying loose parts. Smartly organized, each bore brush, jag, patch tip, rod and handle is held securely in place. This sets the standard for a portable handgun cleaning kit. ..

$34.99

RCBS Uniflow Powder Measure III

The Uniflow-III Powder Measure is the most accurate Uniflow that RCBS has ever produced. The UPM-III throws consistently accurate charges reload after reload.The exacting tight tolerance allow powder to pour uniformly from the measuring cylinder and into a case, thereby eliminating the hazards of overloads caused by clogging when charges are dumped. The UPM-III changes easily from charge to charge of the same powder type without having to empty the powder hopper. The NG resistant anti-static threaded hopper is large enough to hold half a pound of extruded powder or one-third pound of flake powder. New on the UPM-III is the ability to use one metering cylinder and rotor for both rifle and pistol to throw charges from 0.5 grains to 95 grains. The new threaded hopper makes disassembly for cleaning quick and easy.Note: The UPM-III Powder Measure should be used in conjunction with an accurate powder scale for setting the original charge and for checking charges occasionally during the run. Not for use with Black Powder line.Machined reference surfaces for exacting tight tolerances allowing for a dispensing range of- 0.5-95 grains- 0.1 grain to 0.3 grain accuracyNG Resistant, anti-static hopper holds half a pound of extruded powder or one-third pound of flake powderThreaded hopper design makes disassembly for cleaning quick and easy..

$194.99

RCBS Small Base 2-Die Set - 7mmRemMag

Caliber: 7mm Remington MagnumDie Type: Small Base 2-Die Set (Group A Popular Rifle Cartridges) Purpose: Specifically designed for bottleneck cases fired in firearms with tight chambers, such as semi-automatic, pump-action, or lever-action rifles. Sizer Die: Resizes cases slightly below SAAMI minimum specifications (reducing the body and shoulder by a few thousandths) to ensure flawless chambering and cycling. It includes an expander-decapping unit to punch out spent primers. Seater Die: Features a built-in roll crimper to secure the bullet tightly during the seating process...

$74.99

RCBS Shellholder #5

RCBS® Single Stage shell holders are built from hardened steel, providing long-lasting durability and performance. Designed to properly align the case with the reloading die, these shell holders ensure that the reloading process is smooth and efficient. ..

$14.99

RCBS Shellholder #48

If your shell holders don't securely grip the shell and firmly fit into the press during reloading, you're bound to have headspace and sizing problems. RCBS manufacture's shell holders to the industry's tightest tolerances, using only the finest steel.Shell holder #48 fits:• 300 Norma Magnum• 338 Norma Magnum• 338 Lapua Mag..

$19.99

RCBS Shellholder #43

RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They’re sized to fit specific case heads and capture 0.125 inch of the case head for proper SAAMI headspacing.RCBS shell holders are built for Single Stage and Turrets Presses.RCBS shell holders are manufactured to exacting tolerances.RCBS shell holders are hardened for years of use.RCBS shell holders ensure proper alignment between the cartridge and die.The Shell holders are cut to .125" depth for proper headspacing.RCBS Limited Lifetime Warranty.Cartridge Compatibility223 Winchester Super Short Magnum (WSSM)243 Winchester Super Short Magnum25 Winchester Super Short Magnum270 Winchester Super Short Magnum7mm Winchester Short Magnum300 Winchester Short Magnum325 Winchester Short Magnum..

$14.99

RCBS Shellholder #4

..

$14.99

RCBS Shellholder #16

..

$14.99

RCBS Shellholder #10

..

$14.99

RCBS Shell Holder #11

RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They’re sized to fit specific case heads and capture 0.125 inch of the case head for proper SAAMI headspacing...

$14.99

RCBS Group D Full Length 2-Die Set - 300 Norma Magnum

This high-quality, case-hardened steel two-die set is a foundational tool for precision bottleneck rifle cartridge reloading. It includes a Full-Length Sizer Die equipped with an expander-decapping unit to resize outer case dimensions back to SAAMI specifications while punching out spent primers. It also includes a Bullet Seater Die with a built-in roll crimper, allowing you to seat and lock the bullet firmly into place.Caliber: .300 Norma MagnumDie Group: Group D (Speciality/Premium rifle calibers)Thread Size: Standard 7/8"-14 threading (compatible with most standard single-stage and progressive presses)Included Components: Full-Length Sizer Die, Bullet Seating Die, plastic storage case, and standard hex-lock rings...

$119.99

RCBS Full Length Set 243Win

RCBS .243 WIN Full Length Die Set 1 RCBS Dies are for shooters who demand reloads equal to the quality of their guns. Each RCBS Die is made from case hardened steel. The inside surfaces of all dies are precision-drilled and reamed to the same exacting standards as the finest fun mechanisms. Reloading Dies are the most important link in the reloading process. You'll need a set of dies for each caliber you plan to reload. There are three dies in sets used for loading straight-wall type cases and two dies in sets used for loading bottleneck type cases. The third die in a 3-die set is used to expand the mouth of straight-wall cases. In a 2-die set, expanding is done in the sizer die. Full-Length Sizer Dies for bottleneck cases have vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. Dies are properly hardened and hand polished. This special RCBS finishing produces a die that will withstand years and years of the abrasive type of wear cause by the sizing. All RCBS Seater Dies have a built-in roll or taper crimper as appropriate for the particular caliber. To seat bukkets without crimping, simply unscrew the die until the crimp ring no longer engages the case mouth. Large, Easy-to-adjust hex lock rings utilize hex head set screws. Unless otherwise noted, all RCBS precisioneered Dies have the standard 7/8"-14 thread. Dies are packaged in stackable, plastic storage boxes specially designed to protect the dies in shipping. Includes loading data label. ..

$89.99

RCBS Full Length Die Set Group A 7mm-08

This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it’s seated. ..

$89.99

RCBS Full Length Die Set Group A 30-06 Spfld

This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it’s seated. ..

$89.99

RCBS Full Length Die Set 6.5CM

This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it’s seated. ..

$89.99

RCBS Full Length Die Set 300 Wby Mag

This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it’s seated. ..

$89.99

RCBS Full Length Die Set 280 Remington

This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it’s seated. ..

$74.99

RCBS Full Length Die Set 25-06

RCBS Full Length Die Set RCBS Full Length Die Set For 25-06 Remington RCBS Precisioneered Dies are for shooters who demand reloads equal to the quality of their guns. 2-Die Sets are for bottleneck type rifle and handgun cases, and consist of a full length sizer die with expander-decapping unit, and a seater die with bullet seater plug. Full Length Sizer dies for bottleneck cases have vents to prevent case damage from trapped air or excessive lube. Each die is properly hardened and hand pollished. Seater dies have built in crimper appropriate for the particular caliber. Bullets can be seated without crimping. Standard 7/8 x 14 thread size. SPECIFICATIONS: Mfg Item Num: 12001 Category: RELOADING DIES Type :Full Length Die Set Caliber :25-06 Rem RCBS Shell Holder #3 ..

$89.99

RCBS ChargeMaster Supreme Electronic Powder Dispenser - Bluetooth Compatible w/RCBS App

RCBS combined all the best features of its existing Chargemaster powder dispensers, refined accuracy to 0.1-grain, added Bluetooth connectivity to customize and streamline your dispensing processes, and built-in our proprietary "Powder Learn Process" to create a best-in-class measuring experience. Bluetooth compatible with free RCBS app Can disable audible beep 0.1-grain accuracy; 1,500-grain load cell capacity Proprietary Powder Learn Process Powder hopper drain alarm (patent pending) 50 memory slots for favorite and Powder Learn charges 16-segment LCD touchscreen display ..

$699.99 $749.99

RCBS Automatic Priming Tool

The Automatic Priming Tool is fast, accurate and highly sensitive due to a unique single-stage lever system. Primers feed through the auto primer feed tube one by one, preventing potential contamination by oily fingers. Two primer rod assemblies and two primer feed tubes are included. ACHIEVE CONSISTENT PRIMING WITH OUR EASY TO USE PRIMING TOOLS Choose handheld for easy portability or bench mounted for tried and true security. Check out our assortment to find what's right for your reloading setup RCBS: PRECISIONEERED RELOADING RCBS has dedicated itself to the craft of handloading ammunition since it was founded in 1943. RCBS is the leading manufacturer of reloading equipment for rifles and pistols. Reloading is an exact process with tight tolerances. It requires precision and skill to be done correctly. That’s why RCBS makes state-of-the-art products all are backed by RCBS’s industry-leading reputation. ..

$249.99

RCBS 7PRC Full Length Die Set

RCBS 2-Die Sets (Full Length Die Set) are for bottleneck type rifle and pistol cases, and consist of a Full-Length Sizer Die with Expander-Decapping Unit, and a Seater Die with bullet seater plug.2 Die Set Includes:• Full Length Sizer Die with Expander-Decapping Unit• Seating Die with Bullet Seater Plug..

$89.99

RCBS 7.62x39 Full Length Die Set

RCBS Full-Length 2-Die Set for 7.62x39mmThis premium reloading kit is engineered for bottleneck-style cases. It features a Full-Length Sizer Die equipped with an expander-decapping unit (to de-prime and size the case neck to SAAMI minimum dimensions) alongside a Seater Die featuring a built-in roll crimper to seat and lock down the projectile concurrently. To prevent case dimpling and structural damage, the sizer die includes integrated air/lubricant bleed vents...

$59.99

RCBS 6.8Wstrn Full Length Die Set

These two die-sets are intended for reloading bottleneck cases, and consist of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. This die sizes the outside of the case, de-primes, and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full-length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seatedFEATURESStandard 7/8"-14 ThreadProprietary Die SteelSet includes Full-Length Sizing die and Bullet Seating DieSizing die brings cases to SAAMI minimum cartridge dimensions..

$84.99

RCBS 303 British Full Length Die Set

RCBS Reloading 2-Die Set 303 British This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated. Group A Standard 7/8-inch-14 thread ..

$89.99

RCBS 25 Creedmoor Full Length Die Set

This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as its seated...

$84.99

RCBS 22 Creedmoor Full Length Die Set

RCBS 2-Die sets are for bottleneck type rifle and pistol cases, and consist of a Full Length Sizer Die with Expander-Decapping Unit, and a seater Die with Bullet Seater Plug.2 Die Set Includes:• Full Length Sizing Die with Expander-Decapping Unit• Seating Die with Bullet Seater Plug..

$149.99

RCBS .45Colt 3-Die Carbide Roll Crimp Die Set

RCBS® pioneered and developed 3-Die Sets for straight-wall rifle and pistol cases. The Carbide Sizer Die sizes the case and de-primes (the carbide sizer ring eliminates the need to lubricate). The Expander Die expands the case to the proper diameter to accept the bullet, and it imparts case mouth flare/bell for bullet feeding. The Seater Die seats the bullet and roll crimps. ..

$119.99

RCBS Universal Hand Priming Tool

RCBS Universal Hand Priming Tool The Universal Hand Priming tool combines the universal shell holder from the APS® tool with the primer tray from the standard tool to offer unmatched performance. The universal shell holder accept cases from .32 ACP to .45-70 Government. The safety gate isolates the primer seating operation from the primer supply to reduce the risk of tray detonation. The removable primer tray orients their primers for use and will fit any manufacturer’s primer packaging. It includes accessories to seat large and small rifle or pistol primers. ..

$139.99

RCBS #1 Shellholder

Precision machined from solid steel and heat-treated to perform flawlessly. Wide mouth and rounded edge at the opening allow smoother case insertion. #1 ..

$14.99

RBCS Small Base Taper Crimp AR Series Die Set - 308Win

RCBS® AR Series Die Sets are a must for progressive reloaders. They feature a Small Base Sizer Die designed for semi-automatic firearms, and a Taper Crimp Seater Die. The Small Base Sizer guarantees the cartridge will rechamber in AR-platform weapons.RCBS® AR Series Die Sets are a must for progressive reloaders. They feature a Small Base Sizer Die designed for semi-automatic firearms, and a Taper Crimp Seater Die. The Small Base Sizer guarantees the cartridge will rechamber in AR-platform weapons.Features a Small Base Size Die to insure feeding in semi-automatic firearmsTaper Crimp Seat Die crimps bullets so they will not move during recoilUnique 7-degree crimp angle designed for taper crimps in autoloading riflesComes in a Black Die BoxAll RCBS dies are machined to exacting tolerances, hardened and finished to the highest standards in the industryMade in USA..

$89.99

Ramshot LRT Smokeless Powder - 1LB

As one of the slowest spherical powders ever developed, LRT, was created for high performance at extreme ranges. Designed specifically for the 338 Lapua Magnum using heavy, high ballistic coefficient bullets. LRT offers high load densities and low standard deviations for superior accuracy. Hunters who prefer the advantages of overbore magnums like the 257 Weatherby or 30 Nosler will find that LRT meters more easily and produces flatter trajectories than rival propellants. Made in Belgium. ..

$74.99

Ramshot Grand Rifle Powder - 1LB

Ramshot Grand is a double-base spherical propellant that bring the latest propellant technology to the Ramshot family of powders. Temperature-stable… check. Precise metering… check. Accuracy… check. With a density tuned for magnum cartridges, Ramshot Grand offer optimal load densities which equal low extreme spreads and standard deviations. Ramshot Grand excels across a broad spectrum of cartridges from the 243 Winchester all the way up to the 338 Lapua Magnum. Top performers include 6.5, 7mm, and 300 PRC, as well as the 7mm Remington Magnum and the 300 Winchester Magnum. ..

$89.99

Ramcat Diamondback 125gr Broadheads - 3 Pack

The Diamondback is based on Ramcat’s patented Airfoil System found on the ferrule . This concave design reduces wind planning, leading to Ramcat’s renowned field point accuracy and market-leading penetration. The Diamondback is Ramcat’s first entirely fixed blade featuring a 1-1/2” inch cut diameter, Firenock Aero Concentric Technology and Back-Cut Technology. 125 Grain, 3-Pack Patented Airfoil System 100% Stainless Steel Construction Front & Rear Sharpened Blades ..

$56.99

Ramcat Cage Ripper Expandable 100gr Broadhead - 3PK

Ramcat Cage Ripper Expandable 100gr Broadhead - 3PK Three phases lead to complete devastation. The All-New Cage Ripper from Ramcat Broadheads™ is a head where the name says it all. In flight, the quiet and precise blades feature oil resistant rings to remain stealth in flight. At the point of impact, the piston-driven deployment system features a spring mechanism to deploy blades at precisely the right time. Lastly, our full deployment feature is guaranteed with our Posi-Lock Plunger System that locks blades open to maximum cutting diameter upon impact. A true mechanical that is built to perform. 100 Grain, 3-Pack Piston-Driven Mechanical System: Piston-Driven deployment system features spring mechanism deploying blades upon impact. Quiet Flight: Quiet and precise blades featuring oil-resistant rings made out of viton. Penetration & Accuracy: Patented Concave-Scoop Technology for accuracy and devastating penetration. Bullet-Proof Design: Crafted out of hardened stainless steel. Maximum Cut Guaranteed: Spring-Loaded Plunger system guarantees your blades will remain deployed to maximum cutting diameter upon impact. ..

$54.99

Ragim Matrix 62" 22# RH Recurve Bow

Ragim Matrix 62" 22# Right Hand Recurve Bow Matrix model is the best choice in price available on the market. An easy take-down bow with black fiberglass limbs and brown lacquer finish riser. It is equipped with all the inserts to install a sight, a stabilizer and a Berger Button. ..

$179.99

Ragim Matrix 62" 20# RH Recurve Bow

Ragim Matrix 62" 20# Right Hand Recurve Bow Matrix model is the best choice in price available on the market. An easy take-down bow with black fiberglass limbs and brown lacquer finish riser. It is equipped with all the inserts to install a sight, a stabilizer and a Berger Button. ..

$179.99

Ragim Matrix 62" 18# RH Recurve Bow

Ragim Matrix 62" 18# Right Hand Recurve Bow Matrix model is the best choice in price available on the market. An easy take-down bow with black fiberglass limbs and brown lacquer finish riser. It is equipped with all the inserts to install a sight, a stabilizer and a Berger Button. ..

$179.99

Rage X-Treme NC Chisel Tip 100gr Broadheads - 2 Pack

Rage X-treme NC Chisel Tip Features: 2 Blade Broadhead 100 Grain Chisel Tip 6061-T6 Aircraft Grade Anodized Aluminum Ferrule .039" Stainless Steel Blades 2.3" Expandable Cut Integrated Blade Containment System 2 per Package The redesigned X-Treme, now with the exclusive NC (No Collar) blade retention system eliminates the need for a SHOCK COLLAR™, dental band or O-ring. Taking verse from the original X-Treme, the 2-blade design is centered around a 1.425-inch long high-strength 6061-T6 aircraft grade aluminum ferrule whose two. 039-inch thick blades instantly deploy to an enormous 2.3 inches upon impact. Available in 100-grain versions that bolster either a cut-on-contact leading-blade tip or a bone-crushing chisel tip, fans of the X-Treme will find the performance they command in these great heads. *Not Recommended for draw weights under 55 pounds. ..

$59.99

Rage Hypodermic Trypan 2-Blade 100gr Broadheads - 2 Pack

Rage Hypodermic Trypan NC Features: 2 Blade Broadhead 100 Grain Hypodermic Tip Titanium Streamlined Ferrule .039 Blade Thickness 2 " Cutting Diameter No Collar Blade Lock 2 per Package Super Swept Back Blade Design With a 2-inch cutting diameter, the Trypan NC cuts huge entry holes upon impact from the .039-inch-thick razor-sharp machine-stamped blades. Once deployed, the head’s Slip Cam™ design allows the stainless-steel blades to effortlessly slide into an optimized position with perfect attitude for cutting diameter and penetration. The newly incorporated NC (No Collar) technology integrated blade containment system utilizes cutting-edge finger-like tabs on the blades’ pivot point to “anchor” the blades in place while in the closed position. This technology completely eliminates the need for a Shock Collar, dental band or O-ring, while still providing a 100% reliable blade retention system. With a narrow profile, needle-like titanium ferrule and Ferrule Alignment Technology achievement of field point-like accuracy in flight is second nature, while still offering devastating results upon impact. Rage broadheads have become famous for their reliability and ability to put game down fast; the new Hypodermic Trypan NC delivers on all accounts and will continue to convince even the staunchest of critics they should trust their hunt to Rage. ..

$59.99

Rage Hypo 2 Slipcam Rear Deploying 2-Blade 100gr Broadheads

..

$69.99

Rage Crossbow 2-Blade 2" Cut 125gr Broadheads - 3PK

Redesigned version of our Shock Collar™ broadheads No collar blade retention Cut-on-contact tip 2 Blade design with .035” thick stainless steel blades 2” cut 125gr 3PK Anodized aluminum ferrules ..

$59.99

Rage Chisel Tip SlipCam Rear Deploying 100gr 3-Blade Broadheads - 3PK

Rage 3 Blade Chisel Tip SC Features: 3 Blade Broadhead 100 Grain Newly Designed Steel Chisel Tip Anodized Aluminum Ferrule Tough, Razor Sharp .035" Stainless Steel Blades 1.6" Expandable Cut SHOCK Collar for Blade Retention 3 per Package Replacement Blades Available (R60105) Borrowing some design cues from the popular original Rage 3-Blade, the Chisel SC and Chisel Crossbow have impressively strengthened ferrules and blades, improved blade geometry as well as newly designed steel chisel tips for devastating bone strikes. The 3-Blade Chisel broadheads have an initial slap-cut potential of 2.125 inches, and the beefy .035-inch-thick stainless steel blades cam into their 1.6-inch final cutting diameter with sweptback blade angles for increased penetration. Both broadheads utilize a black polymer SHOCK Collar™ that provides both exceptional blade retention and consistently reliable blade deployment. The 100-grain 3-Blade Chisel SC is easily distinguishable by its red anodized aluminum ferrule, and 100-grain 3-Blade Chisel Crossbow has an orange ferrule. ..

$69.99

Rage Black Series Chisel Tip 2" Crossbow Broadheads - 3PK

Product description Aircraft Grade Aluminum Ferrule 420 SS blades 3 Crossbow and 3 Vertical Bow Collars Hardened Steel Chisel Tip Specifications: Number of Blades: 2 Cut Diameter: 2” + Blade Thickness: .035” Weight: 100 grains Quantity: 3-Pack ..

$52.99

Rage 3-Blade Crossbow Chisel Tip - 3PK

Rage 3-Blade Chisel Tip for Crossbows Features: 3 Blade Broadhead 100 Grain Steel Chisel Tip Anodized Aluminum Ferrule Tough, Razor Sharp .035" Stainless Steel Blades 1.6" Expandable Cut SHOCK COLLAR™ for Blade Retention 3 per Package Borrowing some design cues from the popular original Rage 3-Blade, the Chisel SC and Chisel Crossbow have impressively strengthened ferrules and blades, improved blade geometry as well as steel chisel tips for devastating bone strikes. The 3-Blade Chisel broadheads have an initial slap-cut potential of 2.125 inches, and the beefy .035-inch-thick stainless steel blades cam into their 1.6-inch final cutting diameter with sweptback blade angles for increased penetration. Both broadheads utilize a black polymer SHOCK COLLAR™ that provides both exceptional blade retention and consistently reliable blade deployment. 100-grain 3-Blade Chisel Crossbow has an orange ferrule. ..

$69.99

Rage 2-Blade Chisel Tip SC Broadheads - 2 Pack

Rage 2-Blade Chisel Tip SC Features: 2 Blade Broadhead 100 Grain Chisel Tip Anodized Aluminum Ferrule Tough, Razor Sharp .035" Stainless Steel Blades 2" Expandable Cut SHOCK COLLAR™ for Blade Retention 3 per Package Replacement Blades Available (R61005) Rage’s most popular 2 blade broadhead now comes with SHOCK COLLAR™ technology and the bone-crushing chisel tip! No more o-rings, proven Slip Cam technology ensures blade retention and massive entry holes for extreme blood loss and field point accuracy. ..

$69.99

Rage 2" Expandable Cut Shock Collar 100gr 2-Blade 100gr Broadheads - 3PK

Rage 2-Blade SC Features: 2 Blade Broadhead 100 Grain Cut-on-Contact Tip Anodized Aluminum Ferrule Large .039" Leading Edge Blade Tough, Razor Sharp .035" Stainless Steel Blades 2" Expandable Cut SHOCK Collar for Blade Retention 3 per Package Includes Free Practice Head Rage’s most popular 2 blade broadhead is now with shock collar technology! No more o-rings, proven Slip Cam technology ensures blade retention and massive entry holes for extreme blood loss and field point accuracy. ..

$59.99

Quake Claw Slimline Sling - Black

Durable and odor resistantHush Stalker II Sling SwivelsWill not fade or crackThe Claw Slimline Rifle Sling has the most traditional look and feel of any Claw sling ever. The "All Grip, No Slip" pad is just slightly wider than the nylon strap, but still gives the "stick to your shoulder" performance that has made Claw slings famous. This sling is perfect for lighter weight rifles. Plus, every Claw Slimline Rifle Sling comes standard with the Hush Stalker II QD metal sling swivels and a quick-adjust strap...

$44.99

Quake Claw Contour Rifle Sling - Stone Camo

The contour rifle sling has an extremely durable pad that spreads the weight of the firearm across the shoulder to greatly increase comfortThe gripping action of the sling keeps the firearm in place so no tugging, rolling, or pullingThe rifle sling is a perfect addition to any rifle setupSwivel joints are 250% stronger than other conventional swivelsFlexible in -40 Fahrenheit weatherResists cracking & fadingDurable and water resistantDoes not retain water like foam and leather slingsMade in the USA..

$44.99

Quake Claw Contour Rifle Sling - Sand Camo

The contour rifle sling has an extremely durable pad that spreads the weight of the firearm across the shoulder to greatly increase comfortThe gripping action of the sling keeps the firearm in place so no tugging, rolling, or pullingThe rifle sling is a perfect addition to any rifle setupSwivel joints are 250% stronger than other conventional swivelsFlexible in -40 Fahrenheit weatherResists cracking & fadingDurable and water resistantDoes not retain water like foam and leather slingsMade in the USA..

$44.99

Quake Claw 2.0 Rifle Sling - Brown

The CLAW Sling System is widely known for having the best non-slip pad incorporated into a sling. The extremely durable and odor resistant pad is molded into the sling webbing to allow approximately 1/2" of stretch. This stretch spreads the weight of the firearm across the shoulder area greatly increasing your comfort. The unique gripping action of the non-slip pad keeps the firearm in place on your shoulder, eliminating the tugging, rolling and pulling caused by other slings on the market...

$44.99

Quake Claw 2.0 Rifle Sling - Black

The CLAW® Sling System is widely recognized for having the best non-slip pad incorporated into a sling. The extremely durable and odor resistant pad is molded into the black sling webbing that allows approximately 1/2” of stretch. With this elasticity, it spreads the weight of the firearm across the shoulder area while greatly increasing your comfort. The unique gripping action of the non-slip pad keeps the firearm in place on your shoulder, thus eliminating the tugging, rolling and pulling caused by other slings on the market.Hunting in extreme conditions this season? The CLAW® Sling will last as long as you do in both the harshest arctic weather or scorching heat conditions you hunt in. The pad will remain flexible to -40 degrees Fahrenheit and is U.V. stabilized to eliminate fading and cracking. The durable CLAW® Rifle Sling can be used with rifles, shotguns or any firearm with swivel studs mounted on the buttstock and barrel. As an added value, The Claw® Rifle Sling comes with patented Hush Stalker II™ Sling Swivels that will not squeak, rust or rattle. They are over two times stronger and lighter than conventional metal swivels. These swivels fit all standard studs and will not dent or mar the finish on your stock. The CLAW® Rifle Sling is not only comfortable to use and easy to clean, but will not hold water like foam, urethane or leather slings...

$44.99

QAD Ultrarest HDX Left Hand - Red

This top of the line UltraRest has all the features of the UltraRest HD, with an extreme edge for the die-hard hunter! The new modern design and sleek styling of the UltraRest HDX offers extreme compatibility and versatility! If you are the archer that demands nothing but the top of the line, with all the bells and whistles, then the new UltraRest HDX is for you!*Left Hand*SpecificationsSleek, curved capture bar for more clearanceTotal arrow containmentConvenient thumbwheel cocks launcher into position (with Timing Cord Lock)Noise-reducing design: laser-cut felt, cam-brake and dampenersBreak Away Safety FeatureVertical, horizontal, and overdraw adjustmentsPrecision CNC aluminum, stainless steel, and delrin componentsFull draw indicator marks..

$219.99

QAD Replacement Felt Kit - Integrate MX2 Black

QAD Replacement Felt Kit - Integrate MX2 Black..

$14.99

QAD Integrate Berger Mount Adapter - Wide

This kit includes everything you need to use the QAD IMX Arrow Rest on any bow that’s riser is not cut with a dovetail. The kit includes all of the mounting hardware you will need. You will need to measure your riser thickness at the Berger Hole to determine which adapter you need. The wide will accommodate risers that measure .675″-.800″ or more...

$29.99

QAD Integrate Berger Mount Adapter - Narrow

This kit includes everything you need to use the QAD IMX Arrow Rest on any bow that’s riser is not cut with a dovetail. The kit includes all of the mounting hardware you will need. You will need to measure your riser thickness at the Berger Hole to determine which adapter you need. The narrow adapter is for risers that are between .500”-.675”. ..

$29.99

QAD Integrade MX2 Arrow Rest - RH - Black

The MX2, an upgraded version of the MX, is designed for rugged hunting. It features a durable capture bar and robust 7075 aluminum launcher with customizable dampers for quiet operation. The ULTRAREST Integrate MX2 offers precision micro-adjustments, drop-away, let-down control, arrow containment, and lock-down tech. It's compatible with Mathews, Hoyt, PSE, Bowtech, Prime, Athens, Darton, Bear, Xpedition, and APA bows, attaches seamlessly to the Integrate Mounting System®, and is 60% lighter than Berger mounts.SpecificationsReplaceable launch dampers.Total containment technology: improved capture bar, and thumb lever arrow cocking, makes for an extremely reliable hunting platform.Lock down technology: drops and locks down so there is no bounce back and no fletching contactEZ clamp: quick and effortless cord adjustment with no serving requiredSafety break away: when the launcher is forced down, if will safely break away and prevent damage or injuryAnti vibration: cam brake and dampers kill excess noise and vibrationsVelocity drop-away: high-tension spring drops the launcher for clearance at over 400 fpsMicroclick technology: Allows fine tune adjustment of the MX2. Allowing superior performance and tuning capabilities. Velocity drop-away: When launcher rotates to 90 degree while bow is drawn VDT is activated. This Allows the launcher to drop away only while the bow is fired. Letting down your bow slowly will return launcher to 80 degree position...

$369.99

QAD Exodus Full 125gr Broadheads

QAD Exodus Broadhead - Full Version 1 1/4" 125gr 3pk. Here is a fixed blade broadhead that truly gives you field point accuracy while still maintaining remarkable penetration and a large cutting diameter. The innovative Blade Over Shaft Technology has allowed QAD to design a super short head for precise field point accuracy. BOS technology Deadly sharp blades Unrivaled runout Unmatched concentricity Tempered 400 series stainless steel cut on contact head .040 thick blades for extra strength 1 1/4" cutting diameter ..

$59.99

QAD Exodus Full 100gr Broadheads

QAD Exodus 100gr Fixed Blade Broadhead Non Barbed Full Blade 3Pk Here is a fixed blade broadhead that truly gives you field point accuracy while still maintaining remarkable penetration and a large cutting diameter. The innovative Blade Over Shaft Technology has allowed QAD to design a super short head for precise field point accuracy. BOS technology Deadly sharp blades Unrivaled runout Unmatched concentricity Tempered 400 series stainless steel cut on contact head .040 thick blades for extra strength 1 1/4" cutting diameter ..

$64.99

QAD Cable Clamp Replacement Kit

Keep an extra cable clamp kit in your pack to be prepared for anything. The universal cable clamp and 12” timing cord enable you to set up and time any ULTRAREST without the need for a bow press. Package Includes: • 1 Universal Cable Clamp (black, 2 halves) • 1 #6-32 x 3/8 Phillips-Head Screw • 1 #6-32 Nut • 1 12-inch Black Timing Cord (black). ..

$12.99